Microe CET for MTE Series Manual de usuario descargar pdf (Pagina 13)

Page 13

Applicator tool spring loaded contact

cylinder Up/Down position knob

CET scale entry

channel

Spring loaded

contact cylinder

Overview of CET Scale Applicator Tool (Model Number: TSAT-CET)

The CET Scale Applicator Tool

mounts into the MTE’s sensor

mounting holes.

The orientation of the CET Applicator Tool

corresponds to the MTE encoder as shown below.

The benching surfaces correspond to the B and C

faces shown in the MTE interface drawing.

Applicator Tool benching faces

Shown below is the MTE Sensor head mounted in

its fixture.

Applicator Tool - mounting

The CET Applicator Tool mounted in the same

MTE Sensor fixture, ready for CET Scale

installation.

CET™ Scale, MTE Top Mount Configuration

Installation By Mounted Applicator Tool

NOTE:

For best system performance, talc-free gloves or finger cots should be worn during all

steps of tape scale installation.

Thoroughly clean the scale mounting surface and reference edge using a cotton swab or

lint-free cloth dampened with isopropyl alcohol or acetone. Remove all dust and particles.

Tool orientation

arrows

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Sin comentarios

Microe CET for MTE Series Manual de usuario Pagina 13